What are the guidelines to work safely with diamond tools?
To work safely with diamond tools, the good practices included in the guidelines in this article should always be followed.
- Only trained and competent people can use the products.
- If coolant is to be used on the product, make sure it is the right coolant and there is enough flow to flush the debris (slurry) and keep it cool and working to its maximum capacity.
- Some products may not need coolant and can be used as a dry method of cutting, if this operation is to be carried out, a suitable and efficient dry vacuum must be attached to the equipment to remove any harmful dust particles. Removing the dust from the guard/machine will aid in reducing overheating and keeping the product cooler and the blade balanced.
- Never make contact with rotating blades or core barrels.
- Make sure that the operating speed of the machine does not exceed the maximum operating speed of the product.
- All products will wear down once they are being used on any material.
- Regular checks must be carried out on the wear of the segment.
- Avoid applying any side force to diamond saws when cutting.
- If using the product dry, never let it overheat or load. When cutting wet ensure sufficient coolant flow to reduce the risk of breakage.
- Never operate a machine that has insufficient power for the application. This can again result in increased temperatures and excessive pressure between the wheel and the workpiece.
- Under no circumstances must the product be modified in any way.
- Never overspeed the product.
- Always ensure that the correct specification is selected for the application. Never select a product just because it is the right size. It can be dangerous to use abrasives on applications for which they are not intended. If in doubt, consult the supplier.
- Stop using the product when the mounting has become loose.
- Never apply excessive pressure to the product to make it cut.
Links:
Consult the full guide here:
Help us grow!
If you have any suggestions about these contents, find any error or would like to make us aware of anything, please fill out the form below.
