Enviroment working group – G3
The working group Enviroment contains other subgroup specialized in other themes.
Slurry subgroup – G3S1
The working group ‘Slurry Management’ aims to collect the existing information from different countries and manufacturers about solutions and best practices for slurry management in sawing and drilling activities.
Mrs. Erin O’Brien |
The scope of this group to foster debate and sharing of working guidelines, health & safety recommendations, specific regulations and restrictions to be taken into account for the waste management.
The work plan and expected deliverables for this group is organized as follows:
Phase 1: (June 2021 – October 2021)
• Kick-off meeting of the group
• Meetings to prepare a technical guide to serve as basic reference for the waste and slurry management in the sawing and drilling activity.
All these meeting will be held by video conference, and are always scheduled on a Tuesday, from 15:00 to 16:30 (Brussels time, CET).
How to participate?
If you are interested in participating in this working group or any other follow this link.
Please note that specific rules apply to each working group/subgroup, depending on the phase of each project or the annual work plan.
The dates for the meetings of this working group and the documents are published in the IACDS meeting section.
